Are your Structural Drying services available in Severance?

Yes, COS Water Damage Restoration provides round-the-clock Structural Drying services directly in Severance, CO.

How much does emergency service cost in Severance?

We offer upfront, transparent pricing with no hidden fees for all service calls in Severance.

Structural Drying in Severance, CO

Name: COS Water Damage Restoration
Telephone: +1-844-499-0972
Price range: $$

Why Choose Us

What Separates Professional Structural Drying in Severance from Surface Drying

The difference between structural drying done right and structural drying done fast is what ends up in your walls three months later.

🌊

LGR Dehumidification

Low-grain refrigerant (LGR) dehumidifiers operate more efficiently in the low-humidity conditions created by an active drying program than conventional dehumidifiers — achieving lower dewpoint conditions that accelerate evaporation from structural materials. Our Severance structural drying crews deploy properly sized LGR equipment based on the specific volume and material profile of your affected assemblies. Equipment sizing is calculated, not estimated.

📈

Daily Psychrometric Records

Every active drying project in Severance receives a daily psychrometric reading session: temperature, relative humidity, specific humidity, grains per pound of moisture in the air, and moisture content readings at fixed sensor points in each structural assembly. These readings are logged and provided as documentation of the drying program for your insurance claim. Drying is declared complete only when readings at all sensor points fall within the target EMC range for the material species being dried.

🏠

Wall Cavity Drying

Wall cavity drying is where most post-loss mold in Severance properties originates. It's where we focus.

📋

Insurance-Formatted Reports

COS Water Damage Restoration's Severance drying technicians generate moisture logs formatted specifically for insurance claim submission — daily readings at sensor point locations mapped to a floor plan, equipment placement and settings recorded, and final confirmation readings that document the completion of the drying program. Xactimate-compatible line items for each day's equipment and labor make the drying scope transparent to your adjuster and minimize the chance of a supplement dispute on the drying phase of your claim.

Services

Our Severance Structural Drying Scope

Here are the specific drying scenarios and assembly types our Severance team is equipped and trained to handle.

🏠

Wall Framing & Drywall Cavity Drying

The most common drying failure in Severance water damage projects is a wall framing cavity left with elevated moisture content after surface materials are dry. Our Severance team uses calibrated cavity access — typically 1-inch drill holes at the base of the wall framing cavity — to introduce directed airflow from high-velocity air movers into the stud bay, paired with LGR dehumidification to extract the evaporated moisture. Moisture readings at framing sensor points confirm completion. Access ports are patched and filled after the program completes, typically leaving no visible trace of the access procedure.

🧱

Subfloor & Hardwood Assembly Drying

Subfloor and hardwood drying in Severance is species-specific and requires daily monitoring of cupping and moisture gradient.

🔮

Crawlspace & Below-Grade Drying

Crawlspace saturation after a water event in Severance often goes undetected — we include it in every below-grade moisture mapping session.

💨

Ceiling & Overhead Assembly Drying

Ceiling assembly drying is one of the more technically demanding aspects of water damage restoration in Severance structures.

🏛

Commercial & Multi-Room Drying Programs

Large water events in Severance commercial or multi-family properties may affect dozens of rooms across multiple floors — requiring coordinated equipment staging, airflow balancing between spaces, and readings management across a large number of sensor points simultaneously. Our Severance commercial drying team uses scaled equipment deployment and a project management approach that tracks readings and equipment across the full property footprint, adjusting equipment placement and settings daily based on the reading data from each zone.

🔏

Mold Prevention Monitoring

Every active structural drying program in Severance is also a mold prevention program — because the conditions that support mold growth (elevated moisture content in organic materials and elevated relative humidity in the air space) are exactly the conditions a drying program is designed to eliminate. Our daily reading sessions include assessment of the ambient RH and temperature conditions in each drying zone against the threshold conditions that support mold colonization. If readings suggest an elevated mold risk — particularly in projects where extraction was delayed — we address it proactively with targeted antimicrobial treatment during the active drying program.

Professional Structural Drying technician working in Severance, CO

24/7 Emergency Structural Drying experts in Severance, CO

Our Process

How Structural Drying Works in Severance

Moisture Mapping

Before one piece of drying equipment is placed, our Severance team completes a full moisture mapping session using FLIR thermal imaging and calibrated pin-type and non-penetrating meters. The map documents all affected assemblies, saturation levels, and the extent of moisture migration through the structure. Equipment placement and sizing are calculated from this map.

Engineered Equipment Staging

Based on the moisture map, our Severance drying specialist designs an equipment layout: the number and type of LGR dehumidifiers required for the affected volume, the positioning and orientation of high-velocity air movers to create optimal airflow patterns across saturated assemblies, and the placement of cavity access ports for wall or ceiling injection drying.

Daily Psychrometric Monitoring

Daily readings, daily reporting, daily equipment adjustment if needed — documented throughout.

Confirmed Completion

Completion is confirmed by instruments and documented in writing. No visual estimates.

Reviews

Severance Customers on Our Structural Drying Service

★★★★★

"The most important thing about COS Water Damage Restoration's Severance structural drying was that they explained the readings to me every single day. I understood what the numbers meant, what the target was, and how far we were from completion. By day six I was watching the moisture content readings in our wall framing drop from 28% to 11% and understood exactly what was happening and why. That level of transparency is what you need when your home is full of drying equipment for a week."

K. Yamamoto

Verified Severance, CO Customer

★★★★★

"Our insurance adjuster was skeptical about the drying scope initially, but COS Water Damage Restoration's documentation — the daily moisture logs, the floor plan with sensor point locations, the before and after readings — was thorough enough that the adjuster approved the full scope without any back-and-forth. That documentation is worth its weight in the claim settlement alone."

O. Delacroix

Verified Severance, CO Customer

★★★★★

"We manage several Severance commercial properties and structural drying after water events is something we deal with periodically. COS Water Damage Restoration is the only company we use because of their documentation process. Zone-specific readings, daily logs we can review from our office, and a written drying completion report at the end of every project. When a tenant asks for proof that remediation was complete, we have an instrument-confirmed document, not a technician's verbal assurance."

H. Bergstrom

Verified Severance, CO Customer

FAQs

Common Questions — Structural Drying in Severance

How long does Structural Drying take in Severance?

Structural drying timelines in Severance vary based on material type, saturation level, ambient conditions, and the assembly configuration of the affected area. A well-managed drying program using properly sized LGR equipment and daily monitoring typically runs 3-7 days for standard wall and floor assemblies, 5-10 days for wall cavity and subfloor assemblies with significant saturation, and longer for dense structural assemblies such as hardwood over concrete or multi-layer floor systems. Your Severance project manager provides a realistic range at the initial moisture mapping session and updates it daily based on the actual readings.

What is the target moisture content for structural drying in Severance?

Equilibrium moisture content (EMC) targets depend on the material being dried and the ambient conditions in Severance. For softwood framing (the most common structural material), industry standard targets are typically 6-12% moisture content. For hardwood flooring, targets adjust based on species and acclimation moisture content for the ambient conditions in your property. Drywall targets are measured separately by core readings. Your Severance drying crew documents the target range for each material in the project file and confirms completion when all readings fall within range.

Can drywall be dried in place during Structural Drying in Severance?

Standard gypsum drywall can sometimes be dried in place if: the water source was clean (Category 1), the saturation period was short (less than 24-48 hours), the drywall face paper is intact and not delaminating, and cavity moisture readings from the wall behind indicate manageable saturation levels. When these conditions are not met — particularly with Category 2/3 events or extended saturation — removing the drywall and drying the framing directly is both more effective and safer from a mold risk standpoint. Our Severance team evaluates each wall section individually and documents the decision in the written scope.

What are psychrometric readings and why do they matter for Severance drying?

Psychrometrics is the study of air moisture relationships. In a drying program, psychrometric readings measure the temperature and relative humidity of the air in each drying zone, from which we calculate the specific humidity (grains of water per pound of dry air) and the dewpoint temperature. These calculations tell us how much moisture the air is holding relative to its capacity, and how efficiently the LGR dehumidification equipment is removing moisture from the air space. Combined with direct moisture content readings in structural materials at fixed sensor points, psychrometric data gives us a complete picture of the drying system's performance — and tells us when the drying program is genuinely complete, not just visually complete.

Will COS Water Damage Restoration provide drying documentation for my insurance claim in Severance?

Yes — daily psychrometric logs, moisture content readings at sensor point locations mapped to a floor plan, equipment placement and settings records, and a written drying completion report are all generated by our Severance team and provided for your insurance claim file. Our drying documentation is formatted to match what insurance carriers request for the drying phase of water damage claims, which reduces the likelihood of a documentation-based supplement dispute.

Can I stay in my Severance home while structural drying equipment is running?

Yes — in most cases, you can remain in your Severance home while structural drying equipment runs. The equipment creates noise and slightly elevated temperatures in the affected areas, and the ambient humidity in the drying zones drops significantly during the program. Our Severance team will walk you through what to expect during the active drying program: which areas will have equipment, what the noise and temperature conditions will be like, and what household activities (opening windows to outside humidity, running a home humidifier) should be avoided during the drying cycle.

Service Area

Structural Drying Coverage — Severance and CO

COS Water Damage Restoration's Severance structural drying team serves Severance and surrounding communities throughout CO. Daily monitoring included. Call +1-844-499-0972 to get started.

Severance is a Statutory Town in Weld County, Colorado, United States. The population was 7683 at the 2020 census. The town is located on the Colorado Eastern Plains, northwest of Greeley, a crossroads of county roads.